As a must-have item of the summer season, t-shirts have reached the top of the list of best-selling clothing, why do we all love t-shirts? It may be that t-shirts are suitable for both young and old, and suitable for both men and women. They are not only nice to look at but also comfortable to wear. However, as the technology continues to mature, digital printing machines now are not only used in the clothing industry but also widely used in other industries. Due to it is in the form of ink-jet, so relatively "effeminate", and in the use of quite a particular, now Eboyuan share with you several ways to save ink.

1. TRY TO PRINT CENTRALLY
In the use of digital printing machine, it is best not to print every few minutes, if you need to print a lot of things, it is recommended to print things together, because each time the machine started Clean the print head and initialize the printer, and add ink to the ink delivery system, which wastes a lot of ink, so try not to start the machine frequently.

2.DO NOT CHANGE THE CARTRIDGE IMMEDIATEL
We know that digital printing equipment uses sensors to detect the amount of ink in the ink cartridge. Whenever the sensor detects that the ink volume is less than the value set inside the printer, it prompts the ink cartridge to be replaced. At this point you can take out the ink cartridge to reset the internal sensor printer, which determines the installation of a new ink cartridge, you can save a lot of ink by this long-term operation

3. CLEAN THE PRINT HEAD PROPERLY
Most inkjet printers automatically clean the print head when it is turned on, and have buttons to clean the printer. If the automatic cleaning function of the device is not effective, the print head can be cleaned manually The print head should be disassembled according to the steps in the operating manual. The print head can be cleaned by hand by covering the front end of the medical syringe with a thin section of rubber tube and rinsing it in clean water which has been filtered several times Wash with a magnifying glass to carefully observe the spray hole, into the spray hole next to the silt residue, can be removed with soft rubber products, long-term use of integrated printing head is not used due to dry ink and plug the spray hole, can be hot water immersion after cleaning.

Cleaning the printer head should pay attention to the following:

1) do not remove or install the applicator while it is live, and do not touch the electrical contacts of the applicator with your hands or other objects
2) do not remove the nozzle from the printer and place it on its own. Do not place the nozzle under dusty conditions
3) don‘t use sharp objects to clean the applicators, don‘t hit the applicators, and don‘t touch the applicators with your hands

4. REDUCE CLEANING TIMES OF THE PRINTING NOZZLE
In the process of using the machine, there often appear the jam phenomenon of the ink jet head. There are many reasons for the jam, such as the Working Environment of the machine, the quality of the ink, the running time of the machine, and so on Since a large amount of ink is required to clean the nozzle at a time, the cleaning frequency should be reduced as much as possible, but in the case of machines, the specified type of ink should be used as much as possible.
The above four points in place, you will be able to save ink applied to the products of printing, to achieve maximum benefit!